Expand the Possibilities of Turns and Tricks.
What is RECT DISC
CONCEPT
[An ultra-light freestyle plate that unlocks and elevates your board's performance]
By mounting RECT DISC and optimizing binding height, you can enhance edge grip, increase pop for tricks, improve torsional control, reduce drag, and minimize riding resistance—resulting in a significant overall performance upgrade.
Unlike conventional plates, RECT DISC combines an ultra-lightweight design with multiple shape variations, allowing riders to tune the board's characteristics to match their riding style.
Furthermore, with its proprietary INFINITE RAIL SYSTEM (IRS), RECT DISC supports all binding angles with a minimal footprint, greatly expanding both setup freedom and design possibilities.
For detailed differences between each model, please refer to the product pages.
RD-02 FLEX
JPY 22,970(USD 144.06)
Flex stays. Power goes straight in. The world's first hinged carving plate. RD-02 FLEX adds a single hinge at the center of the RD-02, folding in the nose-tail direction. The plate stays hard — only the middle follows the arc of the board. PATENT PENDING / DESIGN REGISTRATION PENDING The hinged snowboard plate structure and the rail + hinge design are patent and design pending in Japan. ■ How RD-02 FLEX works · The plate keeps its stiffness and folds only at the center, so your input goes straight into the board while the board's flex stays intact. · Thanks to the RECT DISC rail system, the hinge direction never changes when you change your binding angle. · Toe and heel plates are independent, so each folds on its own — following not only the board's flex but also its torsion, right under your feet. · During development, we reproduced every situation where a rider bends the board hard — turns, presses, ollies — in 3D simulation, and verified numerically from the design stage that a single center hinge lets the plate follow the arc of the board. ■ The ultimate plate for riding tricks Because the flex is not blocked under your feet, you get the full flex and torsion of the board you already own. On top of that, everything RECT DISC gives you stays: raised binding height for stronger edge grip, and no boot drag. Stiff plates make carving easier, but they change the character of your board. RD-02 FLEX brings out your board's true performance as it is. For carving, and for tricks. Set includes: 4 plates (for both feet) + 8 dedicated joint bolts ■ Size (per plate) Width 114.8mm / Length 159.9mm / Thickness 10.5mm (same as RD-02) Compatible with all 2×4 and 4×4 boards and bindings, domestic or international. ※Not compatible with boards with a waist width of 23.5cm or less (the plate would overhang the board and would not perform as intended). ■ Mounting Same joint-bolt system as RD-02: attach the joint bolts → place the plates → place the bindings → tighten the screws. Mount the plates so that the hinge runs across the width of the board (perpendicular to the rails). ■ Notes · Patent pending and design registration pending. Please do not copy the structure or design. · Do not bend the hinge forcefully by hand while the plate is not mounted on a board. · The design may be changed to improve durability.
RD-H
JPY 24,470(USD 153.46)
A new model fusing RD-02's flexibility with RD-05-class carving performance. Dampers added along the edges absorb vibration while delivering strong edge grip and stable turn performance. Unlike typical "carving plates," there's no strangeness or flex stiffening—the ride is so natural you forget the plate is there. Yet carving performance improves dramatically. That's the greatest feature of RD-H. Even on softer boards, it adds tension to the nose and tail and improves responsiveness at high speed. ■ Collaboration Model: Hayate Kawada Developed in collaboration with Hayate Kawada, whose style centers on distinctively sharp carving and stable edging. RD-H further elevates his riding—delivering edge hold at high speed and natural response during trick-to-turn transitions. A special model that lets anyone experience the "suppleness × stability × sharpness" of Hayate Kawada's style. ■ Size (per plate) Width: 119.0 mm Length: 221.6 mm Thickness: 10.5 mm Set includes: 4 plates (1 pair / both feet) + 8 dedicated screws Compatible with all 4×4 boards and bindings (domestic and international).
RD-02
JPY 18,970(USD 118.97)
The most natural ride feel in the RECT DISC lineup — the essential basic model. Its compact size fits neatly within the binding, allowing you to experience the benefits of a plate while minimally changing the board's natural flex, torsion, and feel. Unlike conventional plates that can feel "unnaturally stiff underfoot" or "dramatically change the board's character," RD-02 is so natural you forget it's even there. Yet you can still clearly feel the RECT DISC benefits: · Enhanced edge grip from elevated binding height · Reduced drag · Improved turn and trick performance through better torsion control For riders who are curious about plates but don't want to change the board feel—or who want to try RECT DISC without any strange sensation—RD-02 is the most accessible and versatile starting point. Set includes: 4 plates (1 pair / both feet) + 8 dedicated screws Compatible with all 4×4 boards and bindings (domestic and international). ■ Size (per plate) Width: 114.8 mm Length: 159.9 mm Thickness: 10.5 mm ※ Not compatible with boards with a waist width of 23.5cm or less.
RD-J
JPY 22,970(USD 144.06)
10mm thick. Not a "middle model" between RD-02's natural handling and RD-H's overwhelming carving performance—it's a complete reconstruction that fuses both. RD-02 integrated with a "mini damper," fused as one body—not simply added on. The damper is shortened and unified so it connects naturally from underfoot. Naturally reinforces from underfoot to part of the nose and tail—without over-stiffening. Recommended for riders who: · Don't want to compromise on both carving and tricks · Want to feel performance even in spring snow · Want to improve both the sharpness and height of jib-carving transitions RD-J is not a compromise model. It's a balance-focused plate designed to take jib-carving to the next level. Set includes: 4 plates (1 pair / both feet) + 8 dedicated screws Compatible with all 4×4 boards and bindings (domestic and international). ■ Size (per plate) Width: 105.8 mm Length: 195.9 mm Thickness: 10.0 mm
RD-R
JPY 21,470(USD 134.65)
Based on RD-02, trimmed to half the thickness at 5mm — the ultimate lightweight model. By pursuing the thinnest possible profile, it achieves a natural feel that preserves underfoot sensation—as if you're not wearing a plate at all. Despite its slim design, you can still fully experience the benefits unique to RECT DISC: enhanced edge grip, reduced drag, and improved board stability. The ideal choice for riders who prioritize lightness and a natural feel, while wanting to elevate their riding quality by one level. A completely new RECT DISC approach that combines responsiveness and ease of handling beyond what you'd expect from a 5mm plate. ■ Collaboration Model: Riku Sekiya Developed in collaboration with Riku Sekiya, whose style is defined by supple board control and sharp tricks. Engineered with an obsessive focus on "lightness," "natural feel," and "ease of movement." The most natural and easy-to-use special model in the RECT DISC lineup. ■ Size (per plate) Width: 105.8 mm Length: 157.3 mm Thickness: 5.0 mm Set includes: dedicated countersunk bolts (M6 × 16.5mm, pitch 1.00)
RD-06
JPY 21,470(USD 134.65)
5mm thin. A ground-trick (jib) dedicated plate that overturns common sense. — The birth of RD-06. At half the thickness of conventional models, it still delivers the full benefit of a plate. A newly designed model for ground tricks that combines lightness, flexibility, rebound, and stability. Mounts without obstructing the board's flex, maintaining a natural ride feel while achieving edge stability and reduced drag. Enhances nollie pop and ground trick precision, while also improving carving performance. A new-sensation plate that is "light and effective." RD-06 is the choice for riders who are serious about their ground tricks. ■ Size (per plate) Width: 200.0 mm Length: 229.6 mm Thickness: 5.0 mm Set includes: 2 plates (1 pair / both feet) + 8 dedicated screws (M6 × 16.5mm, pitch 1.00) Compatible with all 4×4 boards and bindings. ※ Bolt adjustment: If bolts are too short or too long, please obtain bolts 5mm longer than your current bolts.
RD-04
JPY 21,350(USD 133.90)
Designed as a mid-size, all-purpose model. By aligning the edges of the two plates when mounting, it is possible to correct the asymmetry in board flex caused by the binding. Of course, they can also be used offset for different effects. Set includes: 4 plates (1 pair / both feet) + 8 dedicated screws Compatible with all 4×4 boards and bindings (domestic and international). ■ Size (per plate) Width: 115.0 mm Length: 174.0 mm Thickness: 10.5 mm
RD-03
JPY 22,970(USD 144.06)
Developed with the specific goal of controlling torsion and flex independently. Its asymmetric triangular shape makes it possible to increase flex while keeping torsion unchanged, or vice versa. With a single type of plate, a wide variety of setup combinations are possible—the model that lets you enjoy board performance changes the most. Set includes: 4 plates (1 pair / both feet) + 8 dedicated screws Compatible with all 4×4 boards and bindings (domestic and international). ■ Size (per plate) Width: 115.0 mm Length: 221.4 mm Thickness: 10.5 mm
RD-05
JPY 22,970(USD 144.06)
The largest plate in the RECT DISC lineup. By adjusting the mounting position, board flex can be controlled. It's possible to add tension to the nose and tail, or stiffen the torsion—dramatically changing board performance. Set includes: 4 plates (1 pair / both feet) + 8 dedicated screws Compatible with all 4×4 boards and bindings (domestic and international). ■ Size (per plate) Width: 119.1 mm Length: 214.0 mm Thickness: 10.5 mm ※ Not compatible with boards with a waist width of 23.5cm or less (plate protrudes beyond board edge).
RD-07
JPY 34,970(USD 219.31)
The highest-rigidity model in RECT DISC history, engineered specifically for carving performance. Designed to firmly "hold" the entire board from underfoot through the nose and tail. By optimizing the surface area beyond previous models, the center is fully supported and torsional stiffness is dramatically increased. Nose and tail movement is suppressed, delivering stable edge contact as if the effective edge has been extended—an overwhelming edge grip and straight-line stability reminiscent of a hard-flex board. Furthermore— By installing the included high-rigidity stainless steel rod (non-bending), the overall rigidity of the plate rises dramatically. It transforms into a super-hard configuration, taking carving performance to another dimension. RD-07 is not just a stiff plate. It's the model for controlling the entire board and pushing turn performance to its absolute limits. ※ With the stainless rod installed, rigidity is very high. Do not use for jibbing or jump tricks, as it may damage the board. For carving use only. Height: 10mm Set includes: 2 plates (1 pair / both feet) + 8 dedicated screws + 2 stainless rods Compatible with all 4×4 boards and bindings (domestic and international), and EST systems. ■ Size (per plate) Width: 230.0 mm Length: 235.3 mm Thickness: 10.0 mm
RD-01
JPY 18,970(USD 118.97)
This is the updated version of RD-01. There is no major difference in performance, but durability and ease of installation/removal have been improved. The very first RECT DISC model, developed to improve turns and tricks without changing the board's characteristics or ride feel (flex, torsion, etc.). RD-01 is the only model to incorporate a 2×4 (two-by-four) system, providing a unique sense of unity with the board. Set includes: 4 plates (1 pair / both feet) + 8 dedicated screws Compatible with all 4×4 boards and bindings (domestic and international). ■ Size (per plate) Width: 115.4 mm Length: 176.8 mm Thickness: 10.0 mm
Dedicated Joint Bolt (8 piece)
JPY 4,800(USD 30.10)
If you need to replace a joint bolt due to damage or loss, please purchase from here. Using worn or deformed joint bolts can damage the screw hole. We recommend prompt replacement. ※ Joint bolts are included with all plates.
Dedicated Long Screw + Washer (8 set)
JPY 3,500(USD 21.95)
Replacement tape for Center Plate / Long and Short (1 pair, 2 pieces). Attach the tape to the back of the plate, cut the corners, and then mount on the deck surface of the snowboard.